Book an appointment with Pro Ace Heating and Air Conditioning. Available 24/7
Pro Ace Heating and Air Conditioning:
Trane Ductless Air Conditioning System Advantages
Advantages
What are the advantages of a Trane Ductless System?
In general, ductless Air Conditioning Systems have several advantages. Since they do not require ducting, they can be used wherever there is no existing ducting. They can be used in apartments, townhouses, offices and commercial properties. They are a good solution for houses with boilers as a heating system or apartments with electronic baseboard heaters. Trane and Mitsubishi are sold by Trane suppliers in the U.S.A. Pro Ace Heating and Air Conditioning recommends Trane ductless systems because of their technology, efficiency, noise level and technical support. Trane outdoor heat pumps are constructed from galvanized steel which resists damage, rust and wear-and-tear. The units automatically defrost, which improves overall operational efficiency in both heating and cooling, and also saves energy. Trane units utilize a brushless compressor which saves energy and increases overall efficiency. They also have feedback sensors which shut down the compressor in the event of a malfunction. The Trane ductless heat pumps have one outdoor unit with as many as five indoor heads attached. Each zone can be controlled independently but they all have to be in the same mode (either cooling or heating modes).
Pro Ace Heating and Air Conditioning installs, services and repairs Trane ductless systems as well as all the other leading manufacturers.
System cost?
What does a Trane Ductless System cost?
Average cost:
Single head: Average $3500 to $4500 .
Multi Heads: Written estimate requires
Multi-heads for your home can be estimated by calling Pro Ace Heating and Air Conditioning. All our advice is free and we are ready and willing to answer your questions at any time. Since Pro Ace operates a 24 hour emergency service there is always someone there to answer your calls.
How quiet can I expect the Trane System to be?
The specifications on the sound level of Trane units are decibel levels between 19 and 48 for indoor units, and between 63 and 71 for outdoor units, according to the size of the unit. Please refer to the chart below.
What size are Trane Ductless Units?
HVAC units are measured in British thermal units or Btus. One Btu is the amount of heat required to raise the temperature of one pound of water by one degree Fahrenheit. Trane indoor units range between 9000 Btu and 24000 Btu. Outdoor units range between 9000 Btu and 42000 Btu.
What is the average lifetime of a Trane ductless system?
A mini split ductless air conditioning unit should last for approximately 20 years. Pro Ace Heating and Air Conditioning installs ductless systems using techniques that ensure a longer lifetime, a professional look, and minimizes leaks. Pro Ace as an authorized Trane dealer follows all the manufacturer’s specifications. Pro Ace has been installing Trane since 1995 and uses only Red Seal certified air conditioning technicians. At Pro Ace, air conditioning is what we do for a living and your satisfaction is our number one priority. If you have any questions about heating or cooling systems you can call Pro Ace at any time. Pro Ace is an authorized outlet for Trane and Mitsubishi and also a dealer for Daikin, LG, and Ameristar.
How often do ductless systems need to be serviced?
It is imperative that you schedule a regular service and maintenance procedure, at least once every year. Pro Ace Heating and Air Conditioning will check for system leaks and all issues to maintain the manufacturer’s warranty. The indoor filters should be cleaned, depending on their use, but every 3 to 6 months. Pro Ace will remove filters, wash them and then replace them. Pro Ace can set a schedule for you so that you never have to think about it. We will contact you well in advance of the service date to remind you. Pro Ace is the only company to use Digital Tablet Technology in its service and maintenance procedure, which ensures an orderly, accurate, and affordable diagnosis.
What operating costs of a Trane ductless system can I expect?
Trane manufactures state-of-the-art HVAC systems that will operate efficiently for about twenty years. If you schedule regular service and maintenance for your Trane system you will avoid unnecessary repairs and minimize your operating costs over the term. Operating costs may vary slightly depending on the size of your Trane unit and the general climate in which you live. And you may be eligible for government residential energy credits as well as manufacturer rebates. We suggest calling Pro Ace to get a fairly accurate estimate of your particular operating costs per year after calculating these factors. Remember all our information and advice is free! And we are happy to visit your home for a free estimate!
How long will it take to install a Trane ductless air conditioning system?
Normally it takes 1 to 3 days for 5 heads to be installed. It will take less time for a smaller number of heads.
Panel Upgrades Upgrade your electrical panel to handle increased power demands and improve system reliability. Our panel upgrades ensure your home has the capacity to support all your electrical devices safely.
Rewiring Services Replace outdated or damaged wiring to enhance safety and efficiency. Our rewiring services provide peace of mind by reducing the risk of electrical fires and improving overall system performance.
Circuit Breaker Replacements Replace old or faulty circuit breakers to prevent overloads and electrical fires. Our replacements ensure your electrical system operates safely and efficiently.
Surge Protection Protect your home from power surges that can damage appliances and electronics. Our surge protection solutions safeguard your valuable devices from unexpected voltage spikes.
Lighting Upgrades Upgrade to energy-efficient lighting solutions, including LED installations. Our lighting upgrades enhance the ambiance of your home while reducing energy consumption and costs.
Smart Home Integration Integrate smart home technology with your electrical system for enhanced control and convenience. Our smart home solutions allow you to manage lighting, climate control, security systems, and more from your smartphone or tablet.
Installation procedure
Pro Ace Heating and Air Conditioning Trane ductless installation procedure.
– Ductless systems comprise two parts, the condenser that is installed outside and the wall mount unit that is installed inside. Normally we place the condenser on the balcony and run a line set (pipes) and electrical wire to the indoor unit.
– The technician will drill a 2-3 inch hole for the line set and the wire. The hole will be sealed and covered to avoid damage and leakage.
– The technician will provide power to the outdoor unit. Usually they will run a new wire from the electrical panel, which is 208/230 volt.
Trane Ductless Air Conditioning System Specifications
|
TRANE Multi |
||||||
|
Out Door Unit |
Nominal Capacity |
Ports |
Sound |
Dimension H/W/D |
MOCP |
Weight |
|
Model |
|
|
(db)A |
|
|
|
|
4TXM2218A12N0A |
18,000 |
1 to 2 |
63 |
27.6 X 37.6 X 15.6 |
25 |
115 |
|
4TXM2224A14N0A |
24,000 |
2 TO 4 |
69 |
31.1 X 38.6 X 17.3 |
30 |
154 |
|
4TXM2230A15N0A |
30,000 |
2 TO 5 |
71 |
31.1 X 38.6 X 17.3 |
35 |
198 |
|
4TXM2236A15N0A |
36,000 |
2 TO 5 |
71 |
43.3 X 42.8X 17.3 |
35 |
198 |
|
4TXM2242A15N0A |
42,000 |
2 TO 5 |
71 |
43.3 X 42.8X 17.3 |
35 |
283 |
|
Indoor Unit |
Nominal Capacity |
|
Sound |
Dimension H/W/D |
|
Weight |
|
Model |
|
|
(db)A |
|
|
|
|
4MXW2309A10N0A |
9,000 |
|
29-43 |
11.5 X 34.1 X 8.2 |
|
24 |
|
4MXW2312A10N1A |
12,000 |
|
30-43 |
11.5 X 34.1 X 8.3 |
|
24 |
|
4MXW2318A10N2A |
18,000 |
|
31-43 |
12.6 X 40.0 X 9.1 |
|
31 |
|
4MXW2324A10N3A |
24,000 |
|
36-48 |
12.4 X 39.6 X 8.6 |
|
39 |
|
4MXW2330A10N4A |
30,000 |
|
37-48 |
12.6 X 40.0 X 9.1 |
|
30 |
|
4MXW2336A10N5A |
36,000 |
|
38-48 |
12.4 X 39.6 X 8.6 |
|
35 |